Crest Electronics CDVS-5400 SERIES Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 55
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
-32-
CDVS-5400 SERIES DVR
e) PPP Setup
This is used when you need to send emergency image through public phone
line.(Very low speed, we recommend you to use leased line.)
- Use PPP : Check whether you use PPP or not.
- Password & Confirm : Input password for connecting to PPP network.
- Phone Number : Telephone number you will use to connect.
- Modem Select : Select modem.(If none installed, it show ‘N/A’)
f) Quality & Resolution
Choose quality and resolution of image you will send to remote client.
- Quality : 3 steps available (Fine, Normal, Low)
- Resolution : Resolution 180x120 , 360x240 are available.
5.8 Voice Warning
When you need to warn using recorded wave file, you can use this function. If you set a wave file as
warning sound, designate sound comes out through speaker when motion or sensor detected.
To use this, you need to install sound card and select *.wav file.
- Select wave file
Click ‘Folder’ icon
Select *.wav file where it exists.
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 54 55

Comentarios a estos manuales

Sin comentarios