Crest-electronics CRE57000 TRAIN ENGINEER REVOLUTION MANUAL Manual de usuario descargar pdf (Pagina 22)

22

exhausted battery, excessive distance, a short circuit or open circuit on the track, a

derailment or no power on the track the message will change to NOLink.

When the amperage drawn by a locomotive exceeds 8 amps, the capacity of the

onboard receiver, which can continuously supply 5 amps, the receiver will shut

down and the transmitter will display OVERLOAD on the LCD.

The receiver will send an OVERHEAT signal to the transmitter if the receiver’s

temperature exceeds 175 degrees Fahrenheit. If the receiver overheats wait for 5

to minutes for the receiver to cool before continuing to operate it.

After you correct an overload or overheat condition press the zero key [0] on the

transmitter keypad to reset the error message.

Transmitter Battery Voltage - Shows the voltage level of the transmitter’s batteries.

Fresh alkaline batteries should show about 4.5 volts for example. The last item is

a graphic of the transmitter’s battery level. These are for operator reference only

and have no user setable function.

NOTE: The Transmitter will shut off when the battery voltage drops to 3.4 Volts

NOTES:_____________________________________________________________

____________________________________________________________________

Crest-electronics CRE57000 TRAIN ENGINEER REVOLUTION MANUAL Manual de usuario Pagina 22