Crest-electronics CRE57000 TRAIN ENGINEER REVOLUTION MANUAL Manual de usuario descargar pdf (Pagina 25)

and increase from there as the UP ARROW key is held. Use the t and u keys to

set the Start Speed of the locomotive.

l.AUX FUNC. SETUP - This menu item is used to set each of the function

keys to operate either as momentary or

latching. MOMENTARY means that the

function being controlled is on while the

Function key is pressed and turns off when

the key is released. LATCHING means

that the function being controlled is turned

on when the Function key is pressed and

remains on till the same Function key is

pressed again.

AUX MODE: BASIC vs. EXTEND

- Select either BASIC or EXTEND. In

BASIC mode, you will be able to control function keys F1 thru F6. If your

receiver supports more than six auxiliary functions then EXTEND mode is

chosen so that you can control up to 16 auxiliary functions, F1 thru F16.

Use the t and u keys to set each Aux Function to either momentary or latching.

m.LINKING - This nal menu item is used to establish a Link between the

transmitter and the receiver that you just dened.

1) Press and hold the Link Switch on the receiver or locomotive until the LED

on the receiver, or lights on the locomotive, begin to ash.

2) While the LED/lights are ashing press the ENTER key on the transmitter.

In a moment the screen will show that the programming of the unit has been

successful and the ashing will stop. Once linked, the function settings are saved for

this locomotive. Press MENU to return to the Main Menu.

2.USAGE OF CABS

The Revolution transmitter can store up to as

many as 50 locomotives. Since it is unlikely

that each of us would have this number of

locomotives active at one time you can use this

menu item to limit the number of locomotives

that show up when you press the <<T and T>>

keys while viewing the control screen.

1) From the Main Menu screen use p and q

to select 2.USAGE OF CABS and press

ENTER

2) Use the t and u keys to increase or

decrease this range from CAB-0 thru

CAB49.

Press MENU to save this set-up and return to

the Main Menu.

AUX FUNC. SETUP

AUX MODE: BASIC

F1: MOMENTARY

F2: MOMENTARY

F3: MOMENTARY

F4: MOMENTARY

F5: MOMENTARY

F6: MOMENTARY

MAIN SET UP

1.ASSIGN FUNCTION

2.USAGE OF CAB

3.ADD MU/SU

4.COPY LOCO

5.SYSTEM CONFIGURE

2.USAGE OF CABS

CONTROL CAB

CAB-0 TO CAB-5

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Comentarios a estos manuales

Sin comentarios

Crest-electronics CRE57000 TRAIN ENGINEER REVOLUTION MANUAL Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Panel De Control Crest-electronics CRE57000 TRAIN ENGINEER REVOLUTION MANUAL